Buy now, pay later.
3 easy monthly payments with 0% interest
- 1Add your favorites to the cart
- 2We’ll split your payment into 3 equal amounts
- 3Pay the first at checkout
- 4The next two will be spread 30 days apart
Who can use Atome?
- ·Be at least 18 years old
- ·Have a credit/debit card
- ·Have a valid and verifiable phone number
Still have questions?
- Contact Atome:
- For Singapore: support@atome.sg
- For Hong Kong: support@atome.hk
- For Malaysia: support@atome.my
Dashboard Wireless Charger with Low-Profile Mounting Arm (HaloLock)
MagSafe-compatible wireless car charger and low-profile dashboard mount
Read more
Minimize
| Weight | N/A |
|---|---|
| Dimensions | N/A |
Tough Tempered Glass 
Air-Guard Corners
Tough Tempered Glass 
Stay Locking Clear -
CompatibilityOnly compatible with iPhone 12 Pro Max
-
Tough Tempered GlassOfficial "Made for MagSafe" module snaps seamlessly to all official MagSafe accessories
-
Air-Guard CornersCamera Guard Pro protects your camera lens and keeps your pictures looking fantastic
-
Stays Looking ClearGrippy silicone feels soft and keeps your phone secure in your hand
As Seen in
Net Weight  |
7.1 oz (200 g) | Gross Weight |
10.7 oz (302 g) | Length | 5.8" (147 mm) |
| Width | 3.0" (75 mm) | Height | 3.3" (85 mm) |
| Net Weight
|
7.1 oz (200 g) |
| Gross Weight
|
10.7 oz (302 g) |
| Length | 5.8" (147 mm) |
| Width | 3.0" (75 mm) |
| Height | 3.3" (85 mm) |
| Weight | N/A |
|---|---|
| Dimensions | N/A |
Reviews(426)
Reviews (426)
Dashboard Wireless Charger with Low-Profile Mounting Arm (HaloLock)
FAQs
The magnets in this iPhone stand support up to 1,400 g, they are more than strong enough to support your iPhone 13/12 series phone during normal use. When paired with a HaloLock case, the magnetic strength increases to 3,000 g
Yes. The base attaches to your dashboard with reusable adhesive. It also has a locking latch that ensures secure attachment. To make sure that it stays in place, clean your dashboard’s surface with the included cleaning kit before application and follow the provided installation instructions. You can also remove and reposition the mount. Once removed, rinse with running water and air dry before reapplying. Do not wipe the suction cup dry.
To ensure your iPhone 13 or 12 stays securely attached, this charger should be used with a HaloLock magnetic case or an official iPhone 13/12 magnetic case. Other third-party cases may be compatible with the charger, but we can’t guarantee that they will provide a secure connection and safe mounting.
Yes. It supports 7.5W fast wireless charging for the iPhone 13/12 series. To achieve fast charging, we recommend using the included charging cable and an 18W+ QC car charging adapter.
fireman194 –
Look to the left and right of the top display and you’ll see TWO ESR Halolock phone holders. What you don’t see is the THIRD one I put in my wife’s car.The #1 phone holder I’ve ever owned, doesn’t shake, doesn’t fall, doesn’t fail. Easy to maneuver, and will not collapse on broken pot-holed NYC street driving.Phone charges fast- 100% perfect. Cord is long enough too. I may buy another for my son’s car.Outstanding.
Eduardo Eliseo Reyes Rodriguez –
I love it, so far I haven’t had any problems.
Travis –
Got this to get my phone out of my cup holder or the cubby above my shifter that causes the charge cable to get caught up. Car is a ’19 Civic Si, phone is a s24+.Pros: Very sturdy overall design Stays in placeCons: Does not come with the magnet ring that you need for it to even attach You either have to have the usb in the charger pad or into your phone. If you have a car that doesnt have NAV unless hooked to your phone (android auto), youll have to pick to either charge or use the phone display while its mounted, to watch for directions Only works with some cases, the mag ring that isnt included but it required blocks the kickstand on my case, not a big deal for me but may for others, this also means if your phone case can hold cards, its going to be a hinge point and could fall, swing or make it so it cant close again There isnt a dash mount holder that im aware of that doesnt make the phone block the center vents, this is no exception. Come winter (now) that heat is going to blast the back of your phone and could cause damage over time or go into overheat protection Lastly I would continually receive error messages unless I manually switched my phone to charge only. This caused the wireless charging to work intermittently This may work for some but not for me
Phil Bales –
The magnet holder for the iPhone is a strong MagSafe magnet. My phone has not fallen off of it. This charger requires a 18W QC adapter for fast charging, so I bought a power adapter and cord to power the charger. Overall I am very satisfied with this holder and charger.
Matthew McKinney –
This is great for holding your phone and rarely comes off on really rough roads. Be careful because it will meld to your windshield in hot weather and you will need a scraper to remove it.
AlphaAl –
Very sturdy phone holder for Hands-Free talking and GPS!
MRG –
Magnetic attachment is good fix – phone charging good – stays in place as proclaimed
YUCEL –
It is a very high quality product, but I could not mount it on the front console of my AUDI A4 brand vehicle. The vacuum does not work functionally and does not remain fixed on the surface. If you do not find a solution, I will have to return the product.I can provide a better hard surface if you have an adhesive disc option for the solution.Waiting for your reply…
Pharmer –
I had been searching and have tried several phone mounts. The ones on the vents never held, not to mention blocked the vent. I didn’t want something to stick and ruin my cars dashboard. I tried this and it worked great. I will say that on really hot days sometimes when I leave work the suction comes loose, but it’s easy to put right back and it holds great. I’ve had 2 of these for about a year and maybe they’ve lost at suction 4-5 times. Oh….and with the right case it charges my phone and the magnet holds the phone well. Would definitely buy again.
M –
good quality