The charging station can deliver up to 100W of power. Smart power distribution technology automatically allocates the appropriate amount of power to different devices in order to ensure delivery of the fastest charging speeds in the safest way possible. See the table below for full power output information:

If you are already wirelessly charging via any of the wireless charging units and then plug a device in for wired charging via the USB-A port or USB-C port, there will be a temporary delay as the power is redistributed and wired charging starts. The length of the delay may vary according to device you are charging.

It is normal for your device(s) to warm up slightly during wireless charging, but abnormal if it gets too hot.

To prevent overheating when charging, please avoid:

 ● Using a protective case thicker than 2 mm.

 ● Placing metal accessories, credit cards, or pop sockets between your device(s) and the charger.

If overheating occurs, the charger will enter overheat-protection mode and pause charging. If this happens, please:

 ● Disconnect the device(s) from the charger, take off any protective case, and let the device(s) and charger cool down.

 ● Close apps that are not being used on your devices.

 ● When your device(s) and the charger have cooled down, resume charging.

If you’re still having problems with the product, you can contact ESR Customer Support for further assistance. Make sure to briefly mention the tips you’ve already tried so that we can find a faster solution for you.

Please check:

 ● Your phone is an iPhone with MagSafe (iPhone 12 series or later).

 ● Use the included charging cable.

 ● Your protective case is less than 2mm thick.

 ● There are no metal accessories, credit cards, or pop sockets between your phone and the charger.

Additional information about wireless charging speeds:

 ● Wireless charging is not as fast as wired charging.

 ● Limiting the number of applications you have open simultaneously on your phone will improve charging speed.

 ● High temperatures will reduce charging speed and restrict power, which is something that happens during wireless charging.

 ● When your iPhone stops charging at 80%, it may be due to "Optimized Battery Charging". Please check whether turning it off helps. Click Settings > Battery > Battery Health > Turn off "Optimized Battery Charging". If you haven't enabled "Optimized Battery Charging", the issue is mostly caused by the iOS upgrade. Please upgrade or wait for the next system upgrade.

If you’re still having problems with the product, you can contact ESR Customer Support for further assistance. Make sure to briefly mention the tips you’ve already tried so that we can find a faster solution for you.

Not charging or slow charging is usually caused by using a thick protective case or the wrong AirPods charging case model.

 ● Please check if your AirPods charging case supports wireless charging. An AirPods charging case with an outside indicator light supports wireless charging. For further information, please refer to: https://support.apple.com/en-us/HT209580 

 ● The AirPods protective case is no greater than 2 mm thick.

 ● Your AirPods charging case is positioned exactly in the center of the charging pad.

 Additional information:

 ● Wireless charging is not as fast as wired charging.

 ● The charger has a maximum output of 5W for AirPods. 

 ● The indicator light on the AirPods case will display for 8 seconds when it is powered on, but it will not stay on while it is charging.

If you’re still having problems with the product, you can contact ESR Customer Support for further assistance. Make sure to briefly mention the tips you’ve already tried so that we can find a faster solution for you.

Phone attachment issues are often caused by incompatible phone models or non-magnetic cases.

Please check:

 ● Your phone is an iPhone with MagSafe (iPhone 12 series or later).

 ● Your case is either a MagSafe case or a case with a magnetic ring.